Brother HL-3070CW review

The HL-3070CW is fairly good value and quite quick in colour, but its print quality – particularly in photos – is very disappointing.
Written By
Published on 26 April 2011
Our rating
Reviewed price £188 inc VAT

Brother’s LED-based HL-3070CW is one of few laser-class printers shipped without its consumables in place. Fortunately, setup is a reasonably simple job. This is a squat printer, but it’s not especially pretty – its various logos and markings use a mix of fonts, and its overall appearance is somewhat old-fashioned.

For the price, though, it’s a well-specified printer. There’s no automatic duplexer, but it does have both wired and wireless network interfaces. The latter tends to be an expensive upgrade, so it’s good to see it as standard for well under £200. There’s a 250-sheet paper tray and a fold-down multipurpose feed slot, but only the memory is upgradable, from 64MB up to 576MB.

Brother HL-3070CW display

In our tests, the HL-3070CW came very close to Brother’s claimed 16 pages per minute (ppm) speed in both mono and colour. At 14.1ppm, its colour output is particularly quick for a printer at this price. It’s reasonably quiet, but the leading edge of each sheet tends to scrape along the slope of the output tray as it exits the printer, making an annoying grating noise. The multipurpose feed isn’t marked with the correct orientation for envelopes, which the printer crumpled quite badly anyway.

We weren’t impressed with the HL-3070CW’s print quality, either. Black text was fine, but our black and white photo had quite pronounced banding and was too dark, with a resulting loss of detail. Colour photos suffered from a green bias that made skin tones look faintly seasick and many other subjects dull. Illustrations and other graphics were better, although the printer’s dither patterns were visible in some images and colours still looked cool.

Brother HL-3070CW

Although the HL-3070CW comes with a 1,000-page starter toners and its four drums are rated for just 15,000 pages, its running costs are quite reasonable for light or medium use. Buying the printer with the toner and replacement drums necessary for 18,000 mono and 9,000 colour prints would cost less than £1,600, which is quite competitive. Printing larger volumes – which few people need to do – would soon get expensive, however.

If you can live without Wi-Fi and the quick print speeds, HP’s LaserJet Pro CP1525n costs the same, produces better quality and is cheaper to run.

Written by

Simon Handby is a freelance journalist, writer and editor at Hackbash with over two decades of experience in the technology, automotive, and energy sectors. His work has been featured in IT Pro, PC Pro, and he has collaborated with notable clients such as BMW, Porsche and EDF. Simon’s creative and insightful content has earned him recognition, including the award-winning Toyota iQ launch hypermiling campaign.

More about