To help us provide you with free impartial advice, we may earn a commission if you buy through links on our site. Learn more

Epson WorkForce WF-7710DWF review: Great performance, sensible price

Our Rating :
$1,165.10 from
Price when reviewed : £150
inc VAT

If you need to print, copy, scan and fax A3 documents, the WF-7710DWF has you covered

Pros

  • Sensibly priced
  • Fast performance and good results
  • Works extensively with A3 documents

Cons

  • Photo prints not a forté
  • Only one paper cassette

There’ll be a moment, after a long day, when you’ll stop believing that Epson’s WorkForce WF-7710DWF is a big, A3-capable multifunction peripheral, and instead start thinking that you’ve shrunk. It’s exactly like a scaled up version of a regular inkjet MFP, with an A3-capable scanner, an A3+-capable printer, and a big colour touchscreen with chunky buttons.

READ NEXT – Canon Pixma MG5750 review: Budget brilliance

Epson WorkForce WF-7710DWF review: Features

Happily, this Alice-in-Wonderland growth hasn’t taken out any useful features: the WF-7710DWF can connect to a wired or wireless network, and print, scan, copy and fax single- or double-sided A3 documents.

With support for the cloud and mobile devices, and a USB port for walk-up scans or prints, it’s hard to think of anything it doesn’t do, although if you need a second paper cassette you’ll have to spend another £30 or so on the otherwise identical WF-7720DTWF.

Epson WorkForce WF-7710DWF review: Performance speeds

The WF-7710DWF prints a little faster than we’d expect from a typical A4 equivalent. It finished our 25-page black text test at 17ppm, and completed our more complex colour graphics test at a competitive 5.4ppm. It duplex-printed a 10-side colour document on to five sheets at a fair rate of 3.2ipm.

On A3 paper, five pages of black text completed in 43 seconds, while five graphics-rich colour pages took just over two minutes. Scaled up, our duplex test completed at 2.2ipm: that may be slow, but very few other printers can even print on both sides of an A3 sheet.

Both this MFP’s scanner and its 35-page automatic document feeder top-out at A3, not A3+, but again, the list of MFPs that can duplex-scan A3 pages is a short one. Capture speeds were reasonably fast, with a preview of a 150dpi A4 image completing in just eight seconds. Even a 1,200dpi, 6x4in photo scan took less than a minute.

A single copy took nine seconds in black or 23 seconds in colour. Using the ADF, 10-page A4 copies needed one-and-a-half and two-and-a-half minutes respectively. This is one of very few devices that can complete an automatic, double-sided copy of a double-sided A3 document: we timed 10 sides on five pages at 4m 15s.

Epson WorkForce WF-7710DWF review: Results

For the most part, the results were great. Scans were as good as we expect from an Epson device, with good colour accuracy and excellent dynamic range. Plain paper prints were generally very good, too, with firm black text and bold colours, but duplex prints and copies were noticeably fainter, although you can increase the intensity of both at the cost of slower prints.

Photo prints aren’t the WF-7710DWF’s forté, however: although its pigment-based inks are fine for matt media, they can’t produce a shiny finish on gloss paper.

Like a large minority of printers, the WF-7710DWF began warning of low ink during our standard tests, and two cartridges went on to run out during our extra A3 testing.

Replacement colour inks are available in standard or XL sizes, and there’s an XXL black cartridge. Worked out for the highest capacities, running costs are a quite reasonable 7.1p per A4 page.

Epson WorkForce WF-7710DWF review: Verdict

Sensibly priced, with good performance, good results, reasonable running costs and a great selection of features, the WorkForce WF-7710DWF is an excellent choice for a micro-office that works extensively with A3 documents. It’s a Best Buy.