To help us provide you with free impartial advice, we may earn a commission if you buy through links on our site. Learn more

Synology DiskStation DS413j review

Our Rating :
Price when reviewed : £264
inc VAT

It isn't pretty, but this low-cost, four-bay NAS has all the powerful features of Synology’s more expensive products

Specifications

4 disk bays, N/A storage supplied, 1x 10/100/1000Mbit/s Ethernet ports

http://www.morecomputers.com

The DiskStation DS413j is one of Synology’s latest and most inexpensive four-bay NAS devices. It’s not as stylish or quite as sturdy as many of its siblings, but it has full support for the latest features of Synology’s DSM 4.1 operating system.

Unlike more expensive Synology products, there are no front-accessible drive trays, but installing your hard disks is still a simple process. Just unscrew four thumbscrews at the rear of the NAS to open the back plate and you can remove the drive trays. The main part of the brushed metal case can also be removed to provide greater access. Although the case flexes and feels a bit flimsy when you slide it on and off, it feels sturdy enough when it’s in situ.

Synology DiskStation DS413j

Inside is a simple four-bay drive cage with sliding plastic trays for your hard disk. The bottom tray’s a bit fiddly to remove because of the fans mounted on the backplate, but we could easily install our 3.5in SATA hard disks in the drive bays. Conveniently, there are also mounting points on the trays for 2.5in drives.

Once you’ve physically installed the hard disks, you’ll have to connect the NAS to your network and run the setup program provided on the accompanying CD. This installs the Synology assistant, which in turn allows you to install the DSM operating system on the NAS. The disks are automatically formatted using the Synology Hybrid Raid, which automatically picks the optimal RAID configuration for your disks.

We tested the DS413j using a set of four 3TB Western Digital Red hard disks in both SHR and RAID5 modes. In each mode, we performed transfer speed tests using large and small files, with the NAS set up as both an SMB share, which makes a shared folder available to multiple PCs on the network, and as an iSCSI target, which can be used by one PC as if it was a local hard disk.

Synology DiskStation DS413j

Using the default SHR filesystem configuration with an SMB share, we got average transfer speeds of 61.7MB/s for large files and 14.9MB/s for small files, while the iSCSI target saw speeds of 48.3MB/s and 25.7MB/s. While iSCSI configurations typically produce faster transfer speeds than SMB, the limited memory of the DS413j means that it can’t compete with the blistering iSCSI speeds of more expensive devices that have more RAM. We also tested the NAS in a RAID5 configuration, which produced slightly faster transfer speeds in both of our tests. SMB transfer has a large file average of 62MB/s and a small file average of 14.9MB/s, which is the same as SHR, while iSCSI transfer has a large file average of 51MB/s and a small file average of 30.2MB/s: a marked improvement.

These aren’t particularly fast transfer speeds when compared to devices such as the Thecus N5550, but at around £260, the DS413j also costs around £100 less than Thecus’s NAS. The DiskStation has a 1.6GHz Marvell Kirkwood mv6282 ARM processor and 512MB RAM. On its back panel it has a Gigabit Ethernet port for network connectivity and two USB ports, which you can use to connect USB printers or external hard disks. The NAS can take up to four 4TB hard disks for a maximum of 16GB of storage at RAID0.

Synology DiskStation DS413j

The security of the redundant storage provided by a RAID configuration means that your valuable data can be recovered even if one (or more, depending on your configuration) of your disks fails. The DS413j supports RAID 1 for two-disk configurations; RAID 5, which is still the most common configuration for arrays of more than two disks (it can also be configured with a hot-spare in case a disk fails); RAID 6, which gives you less space but greater security against failure and RAID 10, which is a two-disk RAID1 array fully duplicated to a second pair of drives.

Pages: 1 2

Basic Specifications

Price £264
Rating ****
Award Budget Buy

Storage

Capacity N/A
Formatted capacity N/A
Default file system ext4
Price per gigabyte N/A
Interface SATA2
3.5in drive bays 4
Free 3.5in drive bays 4
RAID modes JBOD, RAID 0, RAID 1, RAID 5, RAID 5 + hot spare, RAID 6, RAID 10

Interface

Ethernet ports 1
USB direct access ports (front/rear) 0/0
Other USB ports (front/rear) 0/2
eSATA ports (front/rear) 0/0
Other ports none

Networking

Ethernet connection speed 10/100/1000Mbit/s
Universal Plug and Play support yes
UPnP media server yes
iTunes yes
Print server yes
USB disk server yes
Web server yes
FTP server yes
Protocols supported TCP/IP, SMB/CIFS, AFP, FTP, HTTP, HTTPS, NFS, SSH, Telnet, WebDAV, iSCSI

Miscellaneous

Size 184x168x230mm
Vertical positioning no
Ethernet cable included no
Additional features none
Power consumption active 26W

Buying Information

Price £264
Warranty two years RTB
Supplier http://www.morecomputers.com
Details www.synology.com

Read more

Reviews